OSPREY

34' Dixon 2008, OSPREY
Center teak helm pod with a recently new enclosure.
Gap tower with hardtop and molded cockpit spreader lights beneath tower seat.
Teak decking on bridge deck and aft facing bench seat to right of helm. - Copy
Non-skip cockpit deck and teak coverboards and coaming with transom fish box.
Cockpit fly cover and tower control box cover.
Fully adjustable Stidd helm chair with live well just behind.
Custom helm wheel with speed knob, newer Garmin displays with a Simrad MFD in center (displays engine gauges).
Helm console
Hardtop with blue or white lights. Flush mounted pancake teaser reels. Underside color of hardtop matches hull.
Helm pod
Companion bench seating forward of helm
Transom fish box with cutting board underneath fold open lids
Storage boxes with gasketed tops in tackle center
Live well
Tackle storage center in cockpit
Slide opening cabinets beneath cockpit sides - electric reel plugs
Bow and midship pop-up cleats. Anchor rode in hawser - Anchor stored under forward bench seat on bridge deck
G&G enclosure is recently new
View of Tower station from the bow
Tower helm bench seat and belly band cushions are recently new
Tower helm station
Canvas tower buggy top
Cockpit view from tower
Garmin radar dome on hardtop
Bridge deck. Engine room entry is from portside through fold up ste
Bow Thruster control and JL Stereo - speakers in cockpit and on bridge deck
Garmin and Simrad navigation displays
Garmin display, Cummins smartcraft digital engine display, Glendinning electric engine control selector panel and trim tabs controller
Breaker panel, shore powergen switching, bilge pump monitors and fuel gauge (beneath console)
Locking entry door to cabin, teak and glass folding door with keeper and slide back solid top panel.
Cabin view from entryway
Teak steps down to teak and holly cabin sole
Galley area to starboard, Corian countertop, stainless steel sink
34' Dixon Boat Works Express SF 2008, OSPREY
L-shape settee and refrigerator. Small cabinet storage above
Mini fridge with small freezer section on top
Galley area with GE Microwave oven
Portside door to head compartment. Forward quarter berth and overhead hatch
Electric head with shower wand and floor drain
V-Berth area with filler sections removed
Dometic digital thermostat for reverse-cycle AC
View aft from in front of cabin door
Cummins 8.3ltr 540hp common-rail diesel engine with Airsep filter
Batteries to portside and water tank
Holding tank, hot water heater, bait well pump
Onan generator in sound shield
Engine room fire suppression system and fresh water pump
Heat Exchanger and exhaust
Off the Dock
Kept on a boatlift in Stuart - 34' Dixon 2008 with single 540hp Cummins.
34' Dixon 2008, OSPREY
Center teak helm pod with a recently new enclosure.
Gap tower with hardtop and molded cockpit spreader lights beneath tower seat.
Teak decking on bridge deck and aft facing bench seat to right of helm. - Copy
Non-skip cockpit deck and teak coverboards and coaming with transom fish box.
Cockpit fly cover and tower control box cover.
Fully adjustable Stidd helm chair with live well just behind.
Custom helm wheel with speed knob, newer Garmin displays with a Simrad MFD in center (displays engine gauges).
Helm console
Hardtop with blue or white lights. Flush mounted pancake teaser reels. Underside color of hardtop matches hull.
Helm pod
Companion bench seating forward of helm
Transom fish box with cutting board underneath fold open lids
Storage boxes with gasketed tops in tackle center
Live well
Tackle storage center in cockpit
Slide opening cabinets beneath cockpit sides - electric reel plugs
Bow and midship pop-up cleats. Anchor rode in hawser - Anchor stored under forward bench seat on bridge deck
G&G enclosure is recently new
View of Tower station from the bow
Tower helm bench seat and belly band cushions are recently new
Tower helm station
Canvas tower buggy top
Cockpit view from tower
Garmin radar dome on hardtop
Bridge deck. Engine room entry is from portside through fold up ste
Bow Thruster control and JL Stereo - speakers in cockpit and on bridge deck
Garmin and Simrad navigation displays
Garmin display, Cummins smartcraft digital engine display, Glendinning electric engine control selector panel and trim tabs controller
Breaker panel, shore powergen switching, bilge pump monitors and fuel gauge (beneath console)
Locking entry door to cabin, teak and glass folding door with keeper and slide back solid top panel.
Cabin view from entryway
Teak steps down to teak and holly cabin sole
Galley area to starboard, Corian countertop, stainless steel sink
34' Dixon Boat Works Express SF 2008, OSPREY
L-shape settee and refrigerator. Small cabinet storage above
Mini fridge with small freezer section on top
Galley area with GE Microwave oven
Portside door to head compartment. Forward quarter berth and overhead hatch
Electric head with shower wand and floor drain
V-Berth area with filler sections removed
Dometic digital thermostat for reverse-cycle AC
View aft from in front of cabin door
Cummins 8.3ltr 540hp common-rail diesel engine with Airsep filter
Batteries to portside and water tank
Holding tank, hot water heater, bait well pump
Onan generator in sound shield
Engine room fire suppression system and fresh water pump
Heat Exchanger and exhaust
Off the Dock
Kept on a boatlift in Stuart - 34' Dixon 2008 with single 540hp Cummins.

About

NEW YEAR, NEW ASKING PRICE! Now asking $224,000.

Don't miss out on this cold-molded Carolina express sportfish with a single Cummins 540hp QSC designed by Jesse Rhodes. Built in Charleston, SC by Dixon Boatworks, there is centerline helm pod with a Stidd helm chair, hardtop above has flush mount pancake teaser reels, and a recently new G&G enclosure. The OSPREY has been kept on boatlift and has a modest but useful, air-conditioned cabin below with enclosed head/shower, galley, and V-berth with filler panels, plus an Onan generator. She will make an economical 27mph cruise and the bow thruster makes handling around the dock easy. Tower has controls and there are recently fresh belly band and bench seat cushions. A pair of spreader outriggers and a center rigger and rod holders on the aft hardtop and rear tower legs, plus a transom fish box and a livewell behind the helm seat. Aft facing, cushioned bench seat is just to starboard of the helm. The 4-blade prop is in a pocket on her bottom allowing shallow water comfortable 3'3" draft. Inside there is a V-berth forward with overhead hatch and two filler sections to make a full berth when wanted with a digital thermostat for the A/C on the side. A mini-galley has microwave oven, sink, and refrigerator with modest cabinets and a small settee across on the portside.

Basic Information

  • Builder: CUSTOM CAROLINA
  • Category: Sport Fisherman
  • Model: Dixon Boatworks Express
  • Model Year: 2008
  • YearBuilt: 2007
  • Country: United States
  • Vessel Top: Hardtop W/Tower
  • Cockpit: 1

Dimensions

  • LOA: 34' (10.36m)
  • Beam: 13' (3.96m)
  • Min Draft: 3' 3" (0.99m)

Speed / Weight

  • Cruise Speed: 27 Knots Knots
  • Max Speed: 34 Knots Knots
  • Displacement: 14430 Lbs Pounds
  • Gross Tonnage: 0.00 Pounds
  • Water Capacity: 20 Gal Gallons
  • Holding Tank: 20 Gal Gallons
  • Fuel Capacity: 247 Gal Gallons

Accomodation

  • State Rooms: 1
  • Captains Quarters: No

Hull & Deck

  • Hull ID: FLZGK244C708
  • Hull Material: Composite
  • Hull Configuration: Modified Deep Vee
  • Hull Designer: Jesse Rhodes

Engine Information

  • Engine Count: 1
  • Manufacturer: Cummins
  • Model: 8.3 ltr QSC
  • Engine Type: Inboard
  • Fuel Type: Diesel

Similar Yachts

MORE INFORMATION
DREAM CATCHER
Built: 2001
Builder: BURGER BOAT COMPANY
Length: 108 / 32.91m
Staterooms: 3
$4,950,000
MORE INFORMATION
ZATARA
Built: 2025
Builder: VIKING
Length: 90 / 27.43m
Staterooms: 6
$14,765,000
MORE INFORMATION
PERLAMAR
Built: 2020
Builder: MERRITT BOAT WORKS
Length: 86 / 26.21m
Staterooms: 5
$10,999,999

OSPREY